draft

Publications

Books

  1. Vahid-Araghi, O, Golnaraghi, M.F. (2010), Friction-Induced Vibration in Lead Screw Drives, Springer Science+Business Media, LLC., 1st Edition., Hardcover, ISBN: 978-1-4419-1751-5.
  2. Golnaraghi, M.F., and Kuo, B. [1], (2009), Automatic Control Systems, 9th edition, ISBN 0978-0-470-04896-2, John Wiley and Sons, Second print 2010, Third print 2011.
  3. Kuo, B., and Golnaraghi, M.F. (2003), Automatic Control Systems, 8th edition, ISBN 0-471-34776-7, 736, John Wiley and Sons.
  4. Golnaraghi, M.F., Boulahbal, D. and Leask, R.L., (1999), Solving Engineering Mechanics Problems with Matlab, Book and Software package. ISBN 0-13-021537-6, Prentice‑Hall (Now Pearson).

Invited Articles/Seminars/Conferences and Interviews

  1. Golnaraghi, M.F., (2011), “Smart Sensors for intelligent tires,” MSE Research Team Featured on Global T.V. 6:00pm News hour– Mar 3, 2011.
  2. Golnaraghi, M.F., (2011), “Smart Sensors for intelligent tires,” Natural Resources and Applied Sciences Endowment (NRAS) Presentation to Premier Gordon Campbell Premier of BC, Vancouver Convention Center, February 23, 2011. Details: http://mse.ensc.sfu.ca/news.
  3. Golnaraghi, M.F., (2010), “Mechatronic Systems Engineering at Simon Fraser University,” American Society of Mechanical Engineering, Panel Session: 8-9-3 Innovations in the Undergraduate Mechanical Engineering Curriculum, Tuesday (November 16).
  4. Golnaraghi, M.F., (2010), “Active Engine Mount for Variable Displacement Engines Application,” APMA-AUTO21 Annual Conference & Exhibition Driving Prosperity in the New Automotive Landscape, Project Leader Presentation, Caesars Windsor, Windsor Ontario June 7-10, 2010.

Refereed Journal Papers

Names in bold are the corresponding authors

  1. Hosseini, M., Arzanpour, S. [2], Golnaraghi, M.F. and Parameswaran, A.M. [3], (Accepted 2011 – Manuscript ID JVC-11-0271), “Solenoid actuator design and modeling with application in engine vibration isolators,” Journal of Vibration and Control November 26, 2011.
  2. Won, P.[4], Melek, W.W.[5], Golnaraghi, M.F., (2011), “Fastening tool tracking system using a Kalman filter and particle filter combination,” Meas. Sci. Technol. 22 (2011) 125108 (12pp), doi:10.1088/0957-0233/22/12/125108.
  3. Won, S.P., Melek, W.W., and Golnaraghi, M.F., (To appear 2012), “Remote Sensing Hybridization Technologies for In-door Application Using Bayesian Estimators,” Position Location – Theory, Practice and Advances: A Handbook for Engineers and Academics.  Edited by: Seyed A. (Reza) Zekavat, Michigan Tech, Michael Buehrer, Virginia Tech, John Wiley. Published Online: 6 SEP 2011 DOI: 10.1002/9781118104750.ch20.
  4. Mansour, H., Arzanpour, S.[6], and Golnaraghi, M.F., (2011), “Design of a Solenoid Valve Based Active Engine Mount,” Journal of Mechanical Systems and Signal Processing,” Journal of Mechanical Systems and Signal Processing. Published online before print September 23, 2011, doi: 10.1177/1077546311417275.
  5. Ebrahimi, B., Khamesee, M.B. [7], and Golnaraghi, M.F., (2011), “A hybrid electromagnetic shock absorber for active vehicle suspension systems,” Vehicle Sys. Dynamics, doi: 10.1080/00423110903401871, Volume 49 Numbers 1–2 January–February 2011, pp. 311-332.
  6. Eslaminasab, N., Vahid, O., Golnaraghi, M.F., (2011), “Nonlinear Analysis of Switched Semi-Active Control Systems,” Vehicle Sys. Dynamics, doi: 10.1080/00423110903401871, Volume 49 Numbers 1–2 January–February 2011, pp. 291-310.
  7. Mansour, H., Arzanpour, S. and Golnaraghi, M.F., (2011), “Active decoupler hydraulic engine mount design with app. to variable disp. engine,” J. of Vib. & Cont, 17: 14981508. DOI: 10.1177/1077546310363542.
  8. Mansour, H., Arzanpour, S., Golnaraghi, M.F. and Parameswaran, A.M., (2011), “Semi-active engine mount design using auxiliary Magnetorheological fluid compliance chamber,” Journal of Vehicle System Dynamics, Volume 49, Issue 3, 449-462. DOI: 10.1080/00423111003596750.
  9. Parnian, N. and Golnaraghi, M.F., (2010), “Integration of a Multi-Camera Vision System and Strapdown Inertial Navigation System (SDINS) with a Modified Kalman Filter,” Sensors, 10, 5378-5394; doi:10.3390/s100605378.
  10. Vahid, O., Golnaraghi, M.F., (To appear 2011, Accepted 2010 JVC-09-0116.R2),” A Sliding Mode Vibration Controller for Lead Screw Drives,” Journal of Nonlinear Dynamics.
  11. Kamalzadeh, A., Golnaraghi, M.F., Parameswaran, A.M.[8] and Leung, A.L.[9]., (2011), “A novel sensor design for the tire load monitoring: overall design and proof of concept,” International Journal of Vehicle Design. Int. J. Vehicle Design, Vol. 56, Nos. 1/2/3/4, 2011.
  12. Arzanpour, S. and Golnaraghi, M.F., (2010), “Development of an Active Compliance Chamber to Enhance the Performance of Hydraulic Bushings,” J. Vib. Acoust.  — August 2010 —  Volume 132,  Issue 4, 041012 (7 pages), doi:10.1115/1.4001500
  13. Ghafari, S.H., Abdel-Rahman, E.M.[10], Golnaraghi, M.F., Ismail, F.M., (2010) “Vibrations of balanced fault-free ball bearings,” Journal of Sound and Vibration 329, pp. 1332–1347.
  14. Won, P. and Golnaraghi, M.F., (2010), “A Triaxial Accelerometer Calibration Method Using a Mathematical Model,” IEEE Trans. on Instrumentation & Measurement, Volume: 59, NO. 8, pp. 2144-2153.
  15. Liu, J., Wang, W.[11], Golnaraghi, M.F., and E. Kubica[12], (2010), “A novel fuzzy framework for nonlinear system control,” Fuzzy Sets and Systems, doi:10.1016/j.fss.2010.04.009.
  16. Liu, J., Wang, W., Golnaraghi, M.F., and E. Kubica, (2010), “A neural fuzzy framework for system mapping applications,” Knowledge Based Systems, 23, pp. 572–579.
  17. Liu, J., Wang, W. and Golnaraghi, M.F., (2010), “An enhanced diagnostic system for bearing fault diagnostics,” IEEE Trans. on Instrumentation and Measurement, VOL. 59, NO. 2, pp. 309-321.
  18. Won, P., Melek, W., and Golnaraghi, M.F., (2010), “A Kalman/Particle Filter-Based Position and Orientation Estimation Method Using a Position Sensor/Inertial Measurement Unit (IMU) Hybrid System,” IEEE Trans. on Industrial Electronics, Vol. 57, No. 5, May, pp. 1787-1798.
  19. Mansour, H., Arzanpour, S., Golnaraghi, M.F. and Parameswaran, A.M., (2010), “Semi-active engine mount design using auxiliary Magnetorheological fluid compliance chamber,” Journal of Vehicle System Dynamics, DOI: 10.1080/00423111003596750.
  20. Mansour, H., Arzanpour, S. and Golnaraghi, M.F., (Accepted 2009 – JVC09-87), “Active decoupler hydraulic engine mount design with app. to variable disp. engine,” J. of Vib. & Cont, DOI: 10.1177/1077546310363542.
  21. Bolandhemat, H., Clark, C.[13], Golnaraghi, M.F., (2010), “Development of a Systematic and Practical Methodology for the Design of Vehicle Semi-Active Suspension Control System,” J. Vehicle Systems Dynamics, Volume 48, Issue 5, May 1 2010, pp 567-585.
  22. Eslaminasab, N. and Golnaraghi, M.F., (2009), “A semi-active control strategy for vibration isolation to improve the ride comfort of vehicles,” International Journal of Modelling, Identification and Control, Vol. 7, No.3  pp. 282 – 293.
  23. Eslaminasab, N., Gillespie, T., Khamesee, M.B., Golnaraghi, M.F., (2009), “Modelling and testing of an in-house prototype twin-tube semi-active damper,” Int. J. Heavy Vehicle Systems, Volume 16, Number 4, 22 July 2009, pp. 431-458(28).
  24. Liu, P., Golnaraghi, M.F., Wang, W., (2009), “A multi-step predictor with a variable input pattern for system state forecasting,” Mech. Sys. & Signal Proc., Vol. 23, No. 5, pp. 1586-1599.
  25. Ebrahimi, B., Khamesee, M.B, and Golnaraghi, M.F., (2009), “A novel eddy current damper: theory and experiment,” Journal of Physics D: Applied Physics, 42, 075001, (6pp), doi:10.1088/0022-3727/42/7/075001.
  26. Ebrahimi, B., Khamesee, M.B, and Golnaraghi, M.F., (2009), “Eddy current damper feasibility for vehicle suspension: modeling, simulation and testing,” J. smart materials and structures, Doi:10.1088/0964-1726/18/1/015017, 18, 015017 (12pp).
  27. Vahid, O., Eslaminasab, N. and Golnaraghi, M.F. (2009), “Friction Induced Vibration in Lead Screw Systems: Mathematical Modeling and Experimental Studies,” Journal of Vibration and Acoustics, vol.131, no.2, 021003 (2009) (10 pages).
  28. Won, P., Melek, W. and Golnaraghi, M.F., (2009), “Fastening Tool Tracking System Using an IMU and a Position Sensor with Kalman Filters and a Fuzzy Expert System,” Transactions on Industrial Electronics, ISSN: 0278-0046 May 2009 Volume 56 No. 5 ITIED6, pp1782-1892.
  29. Ghafari, S. H., Ismail, F.,and Golnaraghi, M.F., (2008), “Bearing Prognosis Based on Chaotic Indicators, Wavelet index, and Adaptive Neuro-Fuzzy Inference System,” International Journal of COMADEM, Volume 11, Number 4, pp. 2-10.
  30. Liu, J., Wang, W., Golnaraghi, M.F., and Liu, K[14]., (2008), “Wavelet spectrum analysis for bearing fault diagnostics,” Measurement Science and Technology, 19, pp. 1-9.
  31. Ebrahimi, B. , Khamesee, M.B., Golnaraghi, M.F., (2008), “Permanent magnet configuration in design of an eddy current damper,” J. of Micro system Technologies, DOI: 10.1007/s00542-008-0731-z, Published online: 14 November 2008.
  32. Liu, J., Wang, W. and Golnaraghi, M.F., (2008), “An extended wavelet spectrum for bearing fault diagnostics,” IEEE Trans. on Instrumentation & Measurement, 57(12), pp. 2801-2812.
  33. Arzanpour, S. and Golnaraghi, M.F., (2008), “A Novel Semi-Active Bushing Design for Variable Displacement Engines,” J. of Intel. Material Systems & Structures, 19(9), 989-1003.
  34. Arzanpour, S., Golnaraghi, M.F., (2008), “Development of a Bushing with an Active Compliance Chamber for Variable Displacement Engines,” Journal of Vehicle System Dynamics, Volume 46, Issue 10 October 2008 , pages 867 – 887.
  35. Ebrahimi, B., Khamesee, M.B, and Golnaraghi, M.F., (2008), “Design and modeling of a mag. shock absorber based on eddy current damping effect,” J. of sound and Vib., 315, pp. 875-889.
  36. Biglarbegian, M., Melek, M and Golnaraghi, M.F., (2008), “A novel neuro-fuzzy controller to enhance the performance of vehicle semi-active suspension systems,” Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, Volume 46, Issue 8, 2008, pp 691–711.
  37. Ghafari, S.H., Golnaraghi, M.F., Ismail, F.M. (2008), “Effect of Localized Faults on Chaotic Vibration of Rolling Element Bearings,” Journal of Nonlinear Dynamics, 53: 287–301.
  38. Liu, P., Golnaraghi, M.F., Wang, W. (2007), “A GA-based Feature Optimization Technique for Bearing Fault Diagnostics,” Int. J. of Computer Science and Network Security, VOL.7 No.9, 62-68.
  39. Ghafari, S.H., Golnaraghi, M.F., Ismail, F.M. (2007), “Effect of Localized Faults on Chaotic Vibration of Rolling Element Bearings,” Journal of Nonlinear Dynamics, 53: 287–301.
  40. Shen, Y., Golnaraghi, M.F., and Heppler, G.R., (2007), “Load leveling suspension system with a MR damper,” J. of Vehicle System Dynamics, Vol. 45, No. 4, April 2007, 297–312.
  41. Eslaminasab, N., Biglarbegian, M., Melek, W.W., Golnaraghi, M.F. (2007), “Neural Network based fuzzy control approach to improve ride comfort and road handling of heavy vehicles using semi-active dampers,” International J. of Heavy Vehicle Systems, Vol. 14, No.2, pp. 135 – 157.
  42. Liu, P., Golnaraghi, M.F., Wang, W., (2007), “Wavelet spectrum analysis for bearing fault diagnostics,” Journal of Measurement Science and Technology. Vol. 19, pp. 511-519, 2007.
  43. Parnian, N., and Golnaraghi, M.F., (2007), “Integration of vision and inertial sensors for industrial tools tracking,” Sensor Review, Volume 27, Number 2, 2007, pp. 132-141(10).
  44. Jazar, N.G.[15], Alkhatib, R., and Golnaraghi, M.F., (2006), “RMS Optimization Criterion for Vibration Behavior of Linear Quarter Car Using Analytical Methods,” J. of Vehicle System Dynamics, 44 (6), pp. 477-512.
  45. Shen, Y., Golnaraghi, M.F., and Heppler[16], G.R., (2006), “Semi-Active Vibration Control Schemes for Suspension Systems using MR Dampers,” J. of Vibration and Control, Vol. 12(1), pp. 3-24.
  46. Nakhaie Jazar, G., R. Houim[17], A. Narimani[18], Golnaraghi, M. F., (2006), “Frequency Response and Jump Avoidance in a Nonlinear Passive Engine Mount,” Journal of Vibration and Control, Vol. 12, No. 11, 1205-1237.
  47. Jazar, N.G., Alkhatib, R., and Golnaraghi, M.F., (2006), “RMS Optimization Criterion for Vibration Behavior of Linear Quarter Car Using Analytical Methods,” J. of Vehicle System Dynamics, 44 (6), pp. 477-512.
  48. Jazar, N.G., Houim R., Narimani A. and Golnaraghi, M.F., (2006), “Nonlinear Passive Engine Mount Frequency Response and Jump Avoidance,” Journal of Vibration and Control, 12(11), pp 1205-1237.
  49. Jazar, N.G., Alkhatib, R., and Golnaraghi, M.F., (2006), “RMS Optimization Criterion for Vibration Behavior of Linear Quarter Car Using Analytical Methods,” Journal of Vehicle System Dynamics, 44 (6), pp. 477-512.
  50. Shen, Y., Golnaraghi, M.F., and Heppler, G.R., (2006), “Semi-Active Vibration Control Schemes for Suspension Systems using Magnetorheological Dampers,” Journal of Vibration and Control, Vol. 12(1), pp. 3-24.

 

 


[1] Retired Professor, University of Illinois at Urbana-Champaign

[2] Assistant Professor, Simon Fraser University, Former PhD Student

[3] Professor and Director of the Institute of Micromachine and Microfabrication Research, School of Engineering Science, Simon Fraser University

[4] Postdoctoral Fellow, University of Waterloo, Former PhD Student

[5] Associate Professor, Department of Mechanical and Mechatronics Engineering, University of Waterloo

[6] Assistant Professor, Simon Fraser University, Former PhD Student

[7] Associate Professor, Department of Mechanical and Mechatronics Engineering, University of Waterloo

[8] Professor and Director of the Institute of Micromachine and Microfabrication Research, School of Engineering Science, Simon Fraser University

[9] Professor, School of Engineering Science, Simon Fraser University

[10] Assistant Professor, Systems Design Engineering, University of Waterloo

[11] Former PhD student and PDF, Currently Associate Professor, Mechanical Engineering, Lakehead University

[12] Assistant Professor, Systems Design Engineering, University of Waterloo

[13] Assistant Professor, Computer Science Department, California Polytechnic State University, CA, USA

[14] Former PhD student and PDF, Currently Associate Professor, Mechanical Engineering, Lakehead University

[15] Former PDF, Currently Professor, RMIT, Australia

[16] Professor and Department Chair, Department of Systems Design Engineering, University of Waterloo

[17] Nakhaie’s Grad. Student

[18] Former PhD student, Currently with Honeywell, LA